(주)동아시스템/동아계측기

> 전기전자계측기 > 계장공사용

계장공사용

Multifunction Process Calibrator(FLUKE/754), 0.02%

제조사FLUKE
모델명754
주요기능 다기능교정기

견적문의 카달로그 메뉴얼

상품상세정보

Fluke 754 Documenting Process Calibrator-HART

The 754 is everything you needed and wished for in the 744 and more! HART communication capability is combined to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation.
The 754 does the work of several tools - sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. You’ll fall in love with the new improved graphical screen, Li-on battery for longer life, USB port and new accessories to complete the package.
For documentation, the 754 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.
Supports popular instrumentation management software. The 753 and 754, 743 and 744 work with the Fluke DPC/TRACK2™ software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation.
The Fluke 754 Documenting Process Calibrator-HART: Work smarter. Work faster.

The 753 and 754, 743 and 744 work with the Fluke software, and with popular programs from Honeywell Meridium, Emerson, Cornerstone, Yokogawa, Prime Technologies, Intergraph and others. It allows you to create procedures, instructions, and action lists to deliver fast, easy documentation.

Work smarter. Work faster.

The 754 is a power multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. The 754 also features a powerful built in HART? interface capable of performing nearly all the day-to-day tasks you now perform with a separate communicator.

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Holds up to a full week of downloaded procedures and calibration results.
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
Easy to use
Three year warranty
Bright white dual display. Read both sourced and measured parameters simultaneously.
Multi lingual interface
Rechargeable Li-Ion battery for 10 hour uninterrupted use. Includes gas gauge.
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
Delivered with DPC/Track Sample software.
Compatible with many Asset Management software packages.

HART Capabilities
The 754 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 375 HART communicator.

Requires no external box or second tool for everyday HART calibration and maintenance.
Offers fast HART communication.
Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.
Works with multiple masters, burst mode, and multi-drop configurations.
Is easy to update as additional instruments are added and new HART versions are released.
Interrogate to determine device type, manufacturer, model, tag.
Reconfigure the sensor mapping of dual sensor temperature transmitters.
Read HART PV function and smart transmitter digital output while measuring analog mA output.
Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.
Re-label smart transmitters by reading and writing to the HART tag field.

Versatile HART Protocol support

Manufacturer	Pressure instruments	Temperature instruments	Coriolis instruments
ABB/Kent-Taylor	600T	658T¹
ABB/Hartmann & Braun	Contrans P¹, AS 800 Series
Endress & Hauser	CERABAR S, CERABAR M, DELTABAR S	TMT 122¹,TMT 182¹, TMT 162¹
Foxboro Eckardt		TI/RTT20¹
Foxboro/Invensys	I/A Pressure
Fuji	FCX FCXAZ	FRC
Honeywell	ST3000	STT25T¹, STT25H¹
Micro Motion			2000 2000 IS 9701 9712 9739
Moore Products		344¹
Rosemount	1151 2088 3001C 3051, 3051S	3044C 644 3144 3244, 3144P
Siemens	SITRANS P DS SITRANS P ES
SMAR	LD301	TT301¹
Viatran	I/A Pressure
Wika	UNITRANS	T32H¹
Yokogawa	EJA	YTA 110, 310 and 320

¹Sensor Trim not supported

The 754 supports the commands contained in HART protocol Version 5.7. With 2 MB of memory, the 754 supports a substantial set of HART instructions:

Universal commands provide functions that are implemented in all field devices, for example, read manufacturer and device type, read primary variable (PV), or read current output and percent of span.
Common practice commands provide functions that are common to many but not all field devices, for example read multiple variables, set damping time, or perform loop test.
Device-specific commands provide functions that are unique to a particular field device, for example sensor trim.

Measurement Accuracy

Voltage DC

	1 Year	2 Years
100.000 mV	0.02%+0.005 mV	0.03%+0.005 mV
3.00000 V	0.02%+0.00005 V	0.03%+0.00005 V
30.0000 V	0.02%+0.0005 V	0.03%+0.0005 V
300.00 V	0.05%+0.05 V	0.07%+0.05 V

Voltage AC

Range 40 to 500 Hz	Resolution	1 Year	2 Years
3.000 V	0.001 V	0.5%+0.002 V	1.0%+0.004 V
30.00 V	0.01 V	0.5%+0.02 V	1.0%+0.04 V
300.0 V	0.1 V	0.5%+0.2 V	1.0%+0.2 V

Current DC

	1 Year	2 Years
30.000 mA	0.01% + 5 uA	0.015%+7 uA
110.00 mA	0.01% + 20 uA	0.015%+30 uA

Resistance

	1 Year	2 Years
10.000 Ω	0.05% + 50 mΩ	0.07%+70 mΩ
100.00 Ω	0.05% + 50 mΩ	0.07%+70 mΩ
1.0000 kΩ	0.05% + 500 mΩ	0.07%+0.5 Ω
10.000 kΩ	0.1% + 10 Ω	0.15%+15 Ω

Frequency

	Resolution	Accuracy (2 Years)
1.00 to 110.00 Hz	0.01 Hz	0.05 Hz
110.1 to 1100.0 Hz	0.1 Hz	0.5 Hz
1.101 to 11.000 kHz	0.001 kHz	0.005 kHz
11.01 to 50.00 kHz	0.01 kHz	0.05 kHz

Source Accuracy

Voltage DC

	1 Year	2 Years
100.000 mV	0.01%+0.005 mV	0.015%+0.005 mV
1.00000 V	0.01%+0.00005 V	0.015%+0.0005 V
15.0000 V	0.01%+0.0005 V	0.015%+0.0005 V

Current DC

	1 Year	2 Years
22.000 mA (Source)	0.01%+ 0.003 mA	0.02%+ 0.003 mA
Current Sink (Simulate)	0.02% + 0.007 mA	0.04% + 0.007 mA

Resistance

	1 Year	2 Years
10.000 Ω	0.01% + 10 mΩ	0.015% + 15 mΩ
100.00 Ω	0.01% + 20 mΩ	0.015% + 30 mΩ
1.0000 kΩ	0.02% + 0.2 Ω	0.03% + 0.3 Ω
10.000 kΩ	0.02% + 3 Ω	0.03% + 5 Ω

Frequency

	2 Years
0.1 to 10.99 Hz	0.01 Hz
0.01 to 10.99 Hz	0.01 Hz
11.00 to 109.99 Hz	0.1 Hz
110.0 to 1099.9 Hz	0.1 Hz
1.100 to 21.999 kHz	0.002 kHz
22.000 to 50.000 kHz	0.005 kHz

Technical Data

Data Log Functions

Measure functions:	Voltage, current, resistance, frequency, temperature, pressure
Reading rate:	1, 2, 5, 10, 20, 30, or 60 readings/minute
Maximum record length:	8000 readings (7980 for 30 or 60 readings/minute)

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Rate:	4 steps/second
Trip detect:	Continuity or voltage (continuity detection not available when sourcing current)

Loop Power Function

Voltage:	Selectable, 26 V
Accuracy:	10%, 18 V minimum at 22 mA
Maximum current:	25 mA, short circuit protected
Maximum input voltage:	50 V DC

Step Functions

Source Functions	Voltage, current, resistance, frequency, temperature
Manual Step	Selectable step, change with arrow buttons
Autostep	Fully programmable for function, start delay, stepvalue, time per step, repeat

Environmental Specifications

Operating Temperature

-10 °C to +50 °C

Storage Temperature

-20 °C to +60 °C

Dust/water resistance

Meets IP52, IEC 529

Operating Altitude

3000 m above mean sea level (9842 ft)

Safety Specifications

Agency Approvals

CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993

Mechanical & General Specifications

Size

136 x 245 x 63 mm (5.4“ x 9.6 x 2.5)

Weight

1.2 kg (2.7 lb)

Batteries

Internal Battery Pack Li-ion:

7.2V, 4400mAh, 30 Wh

Battery Life

>8 hours typical

Battery Replacement

Replace without opening calibrator; no tools required

Side port connections

	Pressure module connector
	USB Connector to interface to your PC
	Digital instrument (HART) connector
	Connection for optional battery charger/eliminator

Data storage capacity

1 week of calibration procedures results

90 day specifications

	The standard specification interval for the 750 Series are 1 and 2 years.
	Typical 90 day measurement and source accuracy can be estimated by
	dividing the one year "% of reading" or "%of output" specifications by 2.
	Floor specifications, expressed as "% of full scale" or
	"counts" or "ohms" remain constant.

Temperature, Resistance Temperature Detectors
Degrees or % of reading
Type (α)	Range °C	Measure °C¹		Source current	Source °C		Allowable current²
		1 year	2 year		1 year	2 year
100 Ω Pt (385)	-200 to 100 100 to 800	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
200 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	500 μA	0.06 °C 0.017 % + 0.05 °C	0.12 °C 0.034 % + 0.10 °C	0.1 mA to 1 mA
500 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04 % + 0.10 °C	250 μA	0.06 °C 0.017% + 0.05 °C	0.12 °C 0.034 % + 0.10 °C	0.1 mA to 1 mA
1000 Ω Pt (385)	-200 to 100 100 to 630	0.07 °C 0.02 % + 0.05 °C	0.14 °C 0.04% + 0.10 °C	150 μA	0.06 C 0.017 % + 0.05 °C	0.12 C 0.034 % + 0.10 °C	0.1 mA to 1 mA
100 Ω Pt (3916)	-200 to 100 100 to 630	0.07 °C 0.02 % +0.05 °C	0.14 °C 0.04 % +0.10 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
100 Ω Pt (3926)	-200 to 100 100 to 630	0.08 °C 0.02 % +0.06 °C	0.16 °C 0.04 % +0.12 °C	1 mA	0.05 °C 0.0125 % + 0.04 °C	0.10 °C 0.025 % + 0.08 °C	0.1 mA to 10 mA
10 Ω Cu (427)	-100 to 260	0.2 °C	0.4 °C	3 mA	0.2 °C	0.4 °C	0.1 mA to 10 mA
120 Ω Ni (672)	-80 to 260	0.1 °C	0.2 °C	1 mA	0.04 °C	0.08 °C	0.1 mA to 10 mA

¹For two and three-wire RTD measurements, add 0.4°C to the specifications.
²Supports pulsed transmitters and PLCs with pulse times as short as 1 ms

Temperature, Thermocouples
Type	Source °C	Measure °C		Source °C
		1 year	2 years	1 year	2 years
E	-250 to -200	1.3	2.0	0.6	0.9
	-200 to -100	0.5	0.8	0.3	0.4
	-100 to 600	0.3	0.4	0.3	0.4
	600 to 1000	0.4	0.6	0.2	0.3
N	-200 to -100	1.0	1.5	0.6	0.9
	-100 to 900	0.5	0.8	0.5	0.8
	900 to 1300	0.6	0.9	0.3	0.4
J	-210 to -100	0.6	0.9	0.3	0.4
	-100 to 800	0.3	0.4	0.2	0.3
	800 to 1200	0.5	0.8	0.3	0.3
K	-200 to -100	0.7	1.0	0.4	0.6
	-100 to 400	0.3	0.4	0.3	0.4
	400 to 1200	0.5	0.8	0.3	0.4
	1200 to 1372	0.7	1.0	0.3	0.4
T	-250 to -200	1.7	2.5	0.9	1.4
	-200 to 0	0.6	0.9	0.4	0.6
	0 to 400	0.3	0.4	0.3	0.4
B	600 to 800	1.3	2.0	1.0	1.5
	800 to 1000	1.0	1.5	0.8	1.2
	1000 to 1820	0.9	1.3	0.8	1.2
R	-20 to 0	2.3	2.8	1.2	1.8
	0 to 100	1.5	2.2	1.1	1.7
	100 to 1767	1.0	1.5	0.9	1.4
S	-20 to 0	2.3	2.8	1.2	1.8
	0 to 200	1.5	2.1	1.1	1.7
	200 to 1400	0.9	1.4	0.9	1.4
	1400 to 1767	1.1	1.7	1.0	1.5
C	0 to 800	0.6	0.9	0.6	0.9
	800 to 1200	0.8	1.2	0.7	1.0
	1200 to 1800	1.1	1.6	0.9	1.4
	1800 to 2316	2.0	3.0	1.3	2.0
L	-200 to -100	0.6	0.9	0.3	0.4
	-100 to 800	0.3	0.4	0.2	0.3
	800 to 900	0.5	0.8	0.2	0.3
U	-200 to 0	0.6	0.9	0.4	0.6
U	0 to 600	0.3	0.4	0.3	0.4
BP	0 to 1000	1.0	1.5	0.4	0.6
	1000 to 2000	1.6	2.4	0.6	0.9
	2000 to 2500	2.0	3.0	0.8	1.2
XK	-200 to 300	0.2	0.3	0.2	0.5
XK	300 to 800	0.4	0.6	0.3	0.6