(주)동아시스템/동아계측기

즐겨찾기 추가

통합검색
  > 전기전자계측기 > 배전반시험용 > --->클램프형전류계

--->클램프형전류계

이미지 detail
AC/DC Clamp Sensor(KYORITSU/8115), 130A
  • 제조사KYORITSU
  • 모델명8115
  • 주요기능 전류 클램프형 센서
견적문의 카달로그 메뉴얼
상품상세정보


 

 

Clamp Sensors/Adaptors

KEW 8115

• Permits extension of the AC and DC current ranges of almost any Digital Multimeters (DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/1052 (DMM) the display can be set for direct reading in A.
  • φ12 ACMAX130A DCMAX180A DCACA AutoPowerOff
Measuring rangeAC 0.1 - 130Arms (185Apeak)DC 0 - ±180A
Output voltageAC 10mV/ADC 10mV/A
Accuracy±1.2%rdg±0.4mV (50/60Hz)
±2.5%rdg±0.4mV (40 - 1kHz)		±1.2%rdg±0.4mV (*)
Low battery warning2.2V±0.2V or less - Red LED flash
(1.9V±0.2V - Automatically power off)
Conductor sizeMax. Ø12mm
Withstand voltageAC 3540V (RMS 50/60Hz) for 5 sec.
Operating temperature & humidity range-10 to 55ºC, relative humidity 85% or less (no condensation)
Output impedanceApprox. 10Ω or less
Applicable standardsIEC 61010-1 CAT III 300V Pollution degree 2,
IEC 61010-2-032, IEC 61326-1
Power sourceDC3V (size AAA alkaline battery LR03×2pcs)
* Continuous use: approx. 40 hours
(Auto power off: approx. 20 minutes)
Cord lengthApprox. 1,200mm
Output connectorΦ4mm banana plug
Dimensions127(L)×42(W)×22(D) mm
WeightApprox. 140g
AccessoriesSoft case, LR03×2, Instruction manual

 

*This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.