Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PQ3100 is a comprehensive but easy-to-use power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. Key Features • Record data including voltage, current, power, harmonics, and flicker simultaneously along a single time axis (Flicker recording available in future firmware update) • Capture all power anomalies, including instantaneous outages, voltage drops, and frequency fluctuations, while simultaneously recording trend data • Quick Set: Easy-to-understand on-screen guide for measurement procedures • Bundled PQ ONE application software makes it easy to create reports • Record waveforms for up to 1 second before and 10 seconds after an anomaly occurs • Accurately measure DC currents over extended periods of time (with an AC/DC auto-zero current sensor) • Directly supply power to connected current sensors
Measurement line type | Single-phase 2-wire, Single-phase 3-wire, Three-phase 3-wire or Three-phase 4-wire plus one extra input channel CH4 for voltage/current, (all channels AC/DC measurement) |
---|---|
Voltage ranges | Voltage measurement: 1000.0 V rms or DC, Transient measurement 2.200 kV peak |
Current ranges | 50.000 mA AC to 5.0000 kA AC, 10.000 A DC to 2.0000 kA DC (depends on current sensor in use) |
Power ranges | 50.000 W to 6.0000 MW (determined automatically based on current range in use) |
Basic accuracy | Voltage: ¡¾0.2% of nominal voltage, Current: ¡¾0.1 % rdg. ¡¾0.1 % f.s. + current sensor accuracy, Active power: DC ¡¾0.5 % rdg. ¡¾0.5 % f.s. + current sensor accuracy, AC ¡¾0.2 % rdg. ¡¾0.1 % f.s. + current sensor accuracy |
Measurement items | 1. Transient over voltage : 200 kHz sampling 2. Frequency cycle : Calculated as one cycle 3. Voltage (1/2) RMS, Current (1/2) RMS: one cycle calculation refreshed every half cycle 4. Voltage swell, Voltage dips, Voltage interruption 5. Inrush current : half-cycle calculation 6. Frequency 200 ms: Calculated as 10 or 12 cycles 7. 10-sec frequency: Calculated as the whole-cycle time during the specified 10 s period 8. Voltage waveform peak, Current waveform peak 9. Voltage, Current, Active power, Apparent power, Reactive power, Active energy, Apparent energy, Reactive energy, Energy cost, Power factor, Displacement power factor, Voltage unbalance factor, Current unbalance factor 10. Voltage crest factor, Current crest factor 11. Harmonic/ Harmonic phase angle (voltage/ current), Harmonic power: 0 th to 50 th orders 12. Harmonic voltage-current phase angle: 1 th to 50 th orders 13. Total harmonic distortion factor (voltage/ current) 14. Inter harmonic (voltage/ current): 0.5 th to 49.5 th orders 15. K Factor (multiplication factor) 16. (Available in future firmware update) Instantaneous flicker value: As per IEC61000-4-15 17. (Available in future firmware update) IEC Flicker, ¥Ä V10 Flicker` |
Record | Maximum recording interval: 1 year, Maximum number of recordable events: 9999 ¡¿ 365 days |
Interfaces | SD/SDHC card, RS-232C, LAN (HTTP server), USB 2.0 |
Display | 6.5-inch TFT color LCD (640 ¡¿ 480 dots) |
Power supply | AC adapter Z1002 (100 V to 240 V AC, 50/60 Hz, rated current 1.7 A), Battery pack Z1003 (Continuous use: 8 hr, Charging time: Max. 5 hr 30 m with AC adapter) |
Dimensions and mass | 300 mm (11.81 in)W ¡¿ 211 mm (8.31 in)H ¡¿ 68 mm (2.68 in)D, 2.5 kg (88.2 oz) (including battery pack) |
Accessories | Instruction manual ¡¿1, Measurement guide ¡¿1, Voltage cord L1000-05 ¡¿1 set (Red/Yellow/Blue/Gray/Black, Alligator clip ¡¿5, Spiral tube ¡¿5), Color spiral tube (for identifying clamp sensor color) ¡¿1 set, Spiral tube ¡¿5, AC adapter Z1002 ¡¿1, Strap ¡¿1, USB cable (1 m 3.28 ft length) ¡¿1, Battery pack Z1003 ¡¿1, PQ ONE (software, CD) ¡¿1 |
For power or load current measurement (1 sensor necessary for single-phase measurements, and 2 or 3 sensors required for 3-phase measurements)
AC CURRENT SENSOR CT7126
AC CURRENT SENSOR CT7131
AC CURRENT SENSOR CT7136
*For leak current measurement (not capable of power measurement)
AC LEAKAGE CURRENT SENSOR CT7116
SD Card Precaution
Use only the SD Card Z4001 sold by HIOKI. Compatibility and performance are not guaranteed for SD cards made by other manufacturers. You may be unable to read from or save data to such cards.
SD MEMORY CARD 2GB Z4001
SD MEMORY CARD Z4003
*The L1000-05 is bundled
VOLTAGE CORD L1000-05
GRABBER CLIP 9243
MAGNETIC ADAPTER 9804-01
MAGNETIC ADAPTER 9804-02
*The Z1002, Z1003 are bundled
AC ADAPTER Z1002
BATTERY PACK Z1003
Waterproof Box
For outdoor installation; IP65 compliant, Contact Hioki for a quotation.
CARRYING CASE C1001
CARRYING CASE C1002
CARRYING CASE C1009
CONVERSION CABLE L9910
RS-232C CABLE 9637
LAN CABLE 9642